Plated Brushed Cabinet Pulls Matte Black Zinc Alloy Kitchen Cupboard Handles Cabinet Handles 96 mm Hole Center
Min. Order: 2 piece $0.85 / piece
- Material：zinc alloy
- gross weight：100.00 g
Material: Zinc Alloy;
Cabinet Handles/Drawer Pulls,Handle Ideal for cabinet, drawer, door, cupboard, wardrobe, closet,Smooth and clear stainless steel handles,Great helper to pull out drawer soon and conveniently ;
Easy to Install with Included Screws, screws fit for 14-19 mm door thickness,If your drawer/door is thicker,you can buy longer screws from our store;Package Includes: Selected Handles, Mounting Screws, Installation Instructions;
Larry V.October 29, 2020
Garbage just plain garbage I wouldn’t put this crap on a dog house some of them shows the copper from the oil rubbed bronze and others don’t. half of them look like crap
Schlauza FamilyOctober 22, 2020
These worked well in replacing dated hardware in the kitchen. Fit as measured.
Jacob GOctober 15, 2020
Disappointed with the sturdiness of the handle. They feel light and a bit weak when in use. Additionally two of the handles were still loose when screwed onto the drawer. I had to try different handle until I found one in the box that did not feel loose.
Arianne ChaissonOctober 08, 2020
First time purchasing hardware from this company. Quality was great, loved the way it looks on the cabinets and super fast delivery!
jillOctober 01, 2020
Nice pulls, looks just like the pictures. We had to buy longer screws because the ones that came with didn't fit on our cabinets. But they look great
Courtney CalhounSeptember 24, 2020
Item is good but all of my handles came with small nicks in them :(
swSeptember 17, 2020
The handles themselves are as good as the ones I had purchased in the past at Lowe's, but far less expensive. The problem is that 5-7 of them were useless because the threading on the female part of the handle was off, so the screw never caught and secured the handle to the cabinet.
MarkSeptember 10, 2020
Beware. These pulls ARE NOT exactly 5" on center. They are 5 1/16". So if you are using a tool like a Kreg Cabinet Hardware jig which only goes up to 5", it renders that tool virtually useless. Also, the screw holes inside the hardware are positioned in a place that is very close to the edge of the pull instead of someplace in the center of the left and right side of the pull to allow for a slight error. There is almost NO margin for error.
The price is good, they look nice... but because of the above they are time consuming and difficult to install. In addition, the screws they come with are not long enough to screw through a drawer which with many well made cabinets have a double thickness at the drawer. If I had to do it again I would never had bought. I would have returned them but I started to install a couple and was then stuck with the holes I drilled. Basically DO NOT BUY. Not worth the hassle.
KwgSeptember 03, 2020
They look great! Great stainless steel handles. Easy to install. Great price for 30 handles.
Kenneth L. WongAugust 27, 2020
Great look and quality