Springer PupDecember 07, 2020
I like this wall coat rack, but there are better ones out there. There are also worse ones too. The price is fair, the wood board is only 2 1/2 inches and the wholes to mount it are on the backside. This rack is a little more difficult to mount to studs requiring more time. You have to find the studs, and your measurement between where you place your screws has to be precise since they will have to fit the predrilled holes in the back of the wood board for them to slide in and down. Also be sure to use a level before drilling your holes into the studs. All of this makes installation more difficult than need be, if only there were two holes going all the way through the board with appropriated sized screws to attach to the wall. Then just caps to cover the wholes as other manufacture do. I also installed a Amerock H55662-MORB 27-Inch Beveled Hook Rack, Mahogany with Oil-Rubbed Bronze Hooks which is more expensive but nicer looking, better quality and much easier to install.