6 inch. Brushed 304 Stainless Steel Large Floating Modern House Number 0-9

Ease of Use - Mailbox

These numbers look and feel great. Read others' reviews though about installation...the pegs are VERY sensitive and will break easily. I installed 4 numbers and broker 3 pegs. You're going to have to drill holes and glue these in...if you try to screw them in you'll probably break all the pegs. Once installed though, they look amazing.

Paper thin...

Plated to look like stainless but die cast from zinc alloy. So, be careful not to over-tighten the screw or the threads will strip... Also be careful not to apply lateral force to the mounting screw, or the zinc might crack. The zinc eventually will corrode, especially if the numbers are in a place that receives salt spray. But they should last much longer than plain painted steel. If these were made of stainless, the cost would be 8.7 times higher, so zinc is a reasonable compromise.

I looked for days and days and days for the right numbers for my house. Needed just the right font, just the right size, just the right color. Found all of them with these numbers. Very well made metal and finish. Has the ability to install either "floating" or flush with any surface by just drilling pilot holes and inserting provided pins (need molly screws for concrete or masonry).

Awesome product! Exactly what I was looking for.

Can be found at your local big box hardware store for around the same price. The template provided needs to be used, you HAVE to follow the instructions. Be extra careful with the spokes, as we had one break off in the number just like other reviews did. We super-glued it back on. These are not the highest quality of product out there - so be patient if you really want to make this modern design work for you. You cannot skip the step of making larger holes and filling them with caulk or adhesive - we tried. The problem is the item is imperfect. If you try to make the holes as big as the spokes, the template will not line up. They make you drill larger holes to make room for the variation in the imperfections. This is not a project that can be completed in one afternoon - it will take time over 2 days, so if you are planning to install before a big event, give yourself lots of time! After the struggle, we are satisfied with the result, just make sure you have someone you consider to be handy around if you are not.

Some of the backing for the adhesion was starting to pull away, but we were able to work with that. Since I have a copper finish on my mailbox, I was looking for numbers that would match the finish as closely as possible. This is a great solution- love the end result.

Product as stated

The 'screws' are too deep for most surfaces - it would have to go into a 4x4 block of wood. It also relies on the hole being a little small, a hammer, and glue. Still have not hung them and want to return them.