CustomerNovember 10, 2020
These look great, but installation takes some extra work and materials. Start-to-finish maybe 1.5-2 hours.
The holes on the individual numbers don't exactly line up perfectly in series with the other numbers, in either a horizontal or vertical layout. Would recommend tracing out your arrangement on paper and transferring the hole locations onto that. This will also allow you to visually provide however much space you desire between digits prior to installation.
From there, level and tape the tracing to your wall and drill through the marked locations with a 1/4" bit (this size seemed to work best for the mounting post). The mounting screws included for the raised appearance are unfortunately a bit to long for the other fittings, so you'll also need to saw off about a 1/4" off the ends for it to come out looking flush (dremel tool with a rotary blade worked fine- wear protective eyewear and gloves). A little WD40 helps get the threaded ends into the numbers as well. Once all this is done, hammer numbers into place gently with a rubber mallet.
Overall very satisfied with the outcome appearance. Materials overall seem good quality and I didn't have anything break during installation.